User guide
SS-1200-S, SS-2200-S and SS-4200-S Series Link Aggregating Taps94
© 2012 Datacom Systems Inc
power supply currently in the 'down' state.
- when a dcomPowerSupplyEventDown event notification is received, a management
application SHOULD determine why the power supply is not functioning. If it is determined that
the power supply has failed, then make arrangements to order and install an appropriate
Datacom replacement unit for the failed power supply. If it is determined that the power supply
is unplugged or otherwise disconnected from its electrical source, then make arrangements to re-
plug and reconnect the power supply.
- when a dcomPowerSupplyEventUp event notification is received, a management application
SHOULD determine which previously received dcomPowerSupplyEventDown event this
dcomPowerSupplyEventUp event notification resolves.
5. Definitions
DATACOM-POWER-SUPPLY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32
FROM SNMPv2-SMI
TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
datacomMibs
FROM DATACOM-SMI-MIB;
datacomPowerSupplyMib MODULE-IDENTITY
LAST-UPDATED "201007150000Z" -- 15 July 2010, midnight
ORGANIZATION "Datacom Systems Inc."
CONTACT-INFO
"Datacom Systems Inc.
9 Adler Drive
East Syracuse, NY 13057
USA
Telephone: +1 315 463 1585
URL: http://www.datacomsystems.com
"
DESCRIPTION
"This MIB modules defines managed objects and
notifications exposing status information about