User guide

Application 75

7.2 SS-2200 Series

This section describes an application example to familiarize you with the basic SS-2200-S series

configuration process.

7.2.1 Tapping the Firewall (Telnet configuration example)

PREMISE: This network application consists of two redundant routers that send outbound traffic to

one of two redundant high-availability firewalls

GOAL: This application will use a SS-2210BT-BT/SFP-S as follows:

1. Secure and analyze traffic from either firewall.

The goal requires securing and analyzing the traffic entering or leaving each firewall and not lose

either capability should one of the firewall fail. This is accomplished by tapping both links to each

firewall with a power fault tolerant tap. The Intrusion Detection System (IDS) and Protocol Analyzer

will each require two ports with the capability to aggregate streams of traffic together.