User guide

SS-1200-S, SS-2200-S and SS-4200-S Series Link Aggregating Taps38

4.1.4.21 SET SSH (SE SH)

This command sets the SSH service (default ENABLED) process. It is entered as shown:

SET SSH (SE SH) [OFF or ON]

Example 1:

# SE SH OFF

The SSH protocol will be disabled at end of session.

Example 2:

> SE SH ON

The SSH protocol will be enabled at end of session.

4.1.4.22 SET SSH KEY (SE SH KY)

This command sets the SSH service (default ENABLED) process. It is entered as shown:

SET SSH KEY (SE SH KY) [RSA or DSA]

RSA and DSA are algorithms for public-private-key cryptography. Cut and paste the PEM (Privacy

Enhanced Mail) encoded RSA or DSA key.

Example 1:

# SE SH KY RSA

Please cut & paste the PEM encoded rsa SSH key . . . <--right mouse click if Putty or Terra Term

rsa SSH Key successfully loaded

Example 2:

> SE SH KY DSA

Please cut & paste the PEM encoded dsa SSH key . . . <--right mouse click if Putty or Terra Term

dsa SSH Key successfully loaded

4.1.4.23 SET PING (SE PI)

SET PING ENABLE (SE PI EN): This command enables or disables PING (default ENABLED)

service process. It is entered as shown:

SET PING ENABLE (SE PI EN) [OFF or ON]

Example 1:

# SE PI EN OFF

The PING protocol is now disabled.

Example 2:

# SE PI EN ON

The PING protocol is now disabled.