User guide

Initial Configuration 31
© 2012 Datacom Systems Inc
4.1.3.11 SHOW USERS (SH US)
Displays all users for the configurable product. The response asterisk indicates the connected user.
SHOW USERS (SH US)
Example: # SH US
* Administrator
username
4.1.4 Superuser Commands (Configuration Access)
The following section shows the long form of the Superuser command with the shortcut for the
command noted in parenthesis. A brief overview of the command display function is given followed
by an example (Example: #) command input. All commands, either the exact long form of the
command or the shortcut form of the command, are entered after the prompt (default #) at the
cursor. No auto-fill mode is available.
4.1.4.1 SU (SU)
This command accesses the Superuser mode where the product can be configured. A password
prompt is displayed and the default password is “password.” Then the Superuser prompt is
displayed except the prompt has turned from “>” to “#,” as shown below:
> SU (SU)
Enter Password: ********
#
4.1.4.2 SU SET PASSWORD (SU SE PA)
Change the password used to access Superuser mode. It is entered as shown:
SU SET PASSWORD (SU SE PA)
Example: # SU SE PA
***Warning***
Modification of the SU password has serious consequences if the password is lost!!
***Warning***
# Enter Password: ********
# Confirm Password: ********
#
4.1.4.3 SET PROMPT (SE PR)
This command, followed by a text string, changes the Base Prompt to the text value entered (up to
32 characters). It is entered as shown:
# SET PROMPT (SE PR) prompt text
Example: # SE PR Datacom
Datacom#