User guide

Initial Configuration 27
© 2012 Datacom Systems Inc
4.1.3.5 SHOW GROUPS (SH GR)
This command displays all ports as designated by the administrator (Superuser) as belonging to the
same logical group. Specifically, groups can be configured as if they were a single logical port,
enabling a high degree of control during both the initial setup and all subsequent moves or changes.
The GROUP NAME followed by the ports included in the group are displayed. It is entered and
displays data as shown:
> SHOW GROUPS (SH GR)
Example:
> SH GR
TAP 1:
1: t1-p1
2: t1-p2
TAP 2:
1: t2-p1
2: t2-p2
TAP 3:
1: t3-p1
2: t3-p2
TAP 4:
1: t4-p1
2: t4-p2
>
4.1.3.6 SHOW MANAGEMENT (SH MA)
This command displays Management RJ45 port information and authentication information. It is
entered and displays data as shown:
> SHOW MANAGEMENT (SH MA)
Example:
> SH MA
Security Version: 1.0.0.12
MAC Address: 00-14-e2-00-10-d3
IP Address: 192.168.1.1
IP Subnet: 255.255.0.0
IP Default Gateway: 192.168.1.0
IP Port: 2370
FlashUtils protocol: enabled
Telnet protocol: enabled
SSH protocol: enabled
Ping protocol: enabled
SNMPv3 protocol: enabled
>