User manual

B-5
4. If you are using HP-UX 9.05, you can determine which SCSI
IDs are currently in use by looking under the H/W Path head-
ing. The listing 2.0.1 scsi is the built-in SCSI bus controller. For
devices connected to the built-in SCSI bus, such as disks, the
fourth number is the SCSI ID for that device. For example, the
listing 2.0.1.6
.0 in the sample device list tells you that there is a
SCSI device (a disk) currently using ID 6 on the SCSI bus.
The information is presented in a different format if you are
using HP-UX 10.0 or later; although you still look under the
H/W Path heading.
NOTICE: Never use SCSI address 7 for any device. Ad-
dress 7 is reserved for the SCSI controller.