User's Manual

48
This screen shows you where to place the SpyderX unit for the calibration
process. Remove the cover of the sensor as it is used as a counter-weight so
that the unit remains in place and flat against the screen. We recommend that
you slightly tilt your display back so the unit rests against the monitor without you
having to hold it in place, as any movement can cause a poor calibration.
Once the unit is in place, click the next button to proceed with the calibration. A
series of color patches will flash on the screen; this process takes approximately
1-3 minutes. If you choose Grey Calibration “Better”, this process takes about 1-2
minutes longer.