User Manual

SpyderTune

These settings should only be changed if you want to match multiple monitors

with different backlight technologies, as it will change the precise correction done

by the SpyderX calibration.

When done properly, a StudioMatch calibration will match multiple displays. If

you are using multiple displays and they work with different backlight

technologies and different panels, it gets complicated to match them together.

That's where the SpyderTune function of SpyderX comes in.

Only use SpyderTune if absolutely necessary. It will change the sophisticated

monitor calibration of your SpyderX and is therefore only a compromise to match

screens whose technological differences make it difficult to achieve an alignment.

Metamerism Failure

Our eyes can't adapt to multiple light sources if they have a different spectral

distribution as the receptors in our eyes absorb light at various wavelengths.

Even though the SpyderX or any other sensor will measure both as having the

same value. This is also known as the "metamerism failure".

SpyderTune Sliders

Inside SpyderTune, you can change the White Point from Red to Blue and from

Purple to Green. Furthermore, you can change the intensity of the Gamma and

the Brightness of your Display.