User Manual

42
If you have selected Room Light On, the software will now want to take a reading
of your room light. Place the Spyder on your desk and click the next button; a
reading of your room light will be taken. Please be sure that no direct light is
falling on your display or the Spyder at this time.
Next you will take brightness readings of the displays you are looking to match.
The software will keep track of these displays and when finished, it will
recommend settings based on its readings. It will give you a targeted brightness,
keep track of this number if you are going to try to match monitors connected to
another machine, it will also give you recommended gamma and White Point
settings based on its readings.