User Manual

41
StudioMatch
Choose the displays you would like to match using the StudioMatch feature.
StudioMatch allows you to get a consistent picture on all of the displays.
If you are trying to match displays from another machine, please enter the lowest
Brightness Value on this page as well. If you haven’t calibrated the other
machines yet, leave this blank for now.
**Note: Please deactivate any Auto Brightness features and stand by your
displays to make brightness adjustments (if possible) when prompted.
Click on “Next” and the software will ask to take a reading of the room light, make
sure no light is falling directly on the Spyder or screen at this point and then click
“Next”.