User Manual

39
Step-by-step Assistant
If this is your first time calibrating this display, you will automatically have Full
Calibration selected here. On subsequent calibrations you can choose doing a
FullCAL, a ReCAL, or a CheckCAL. A FullCAL will perform a full calibration of
your display. A ReCAL will recalibrate your display. A CheckCAL will check to
see if your display is still accurate.
You will also see your current target settings for Gamma, White Point, and
Brightness here. To make an adjustment to either of these targets, please
choose the drop down next to each setting to make your changes.
In the lower left corner there is an “Advanced Settings” button.