User Manual

19
Measuring Room Light
If you have selected Room Light On, the software will now want to take a reading
of your room light. Place the Spyder on your desk and click the next button; a
reading of your room light will be taken. Please be sure that no direct light is
falling on your display or the Spyder at this time.
After the reading is done the software will tell you what the room light
measurement is. It can be: Very Low, Low, Medium, High, Very High
The software will recommend target settings here as well based on the room
lighting level. You can choose to accept these targets or continue with the targets
you have already chosen.
Please click “Next” to proceed to the Calibration window.