User's Manual

DSD Gen5
User Manual
Edition 9.1 _ 1911
DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB
Copyright by DataCollect Traffic Systems GmbH ♦ www.DataCollect.com Technical changes possible at all times
DataCollect reserves the right to change any information contained within this technical note at its own discretion
3
1 Correct use
The speed measurement and display system DSD (DataCollect Speed Display) is exclusively
intended for the measurement and display of speeds in road traffic.
The safety and operating instructions in this manual must be strictly observed. Therefore
please read the entire operating instructions before using the product.
This product fulfils the legal, national and European requirements. All company names and
product designations are trademarks of the respective holder. All rights reserved.
2 Safety regulations
 In case of damage resulting from the non-observance of these operating instructions, the
warranty/guarantee shall become null and void! We shall not assume liability for
consequential damage!
 We shall not assume liability for material or personal damage caused by improper handling
or non-observance of the safety instructions. In such cases the warranty/guarantee shall
become null and void.
 Unauthorised opening, conversion and/or modification of the product is not allowed for safety
and approval reasons (CE).
 Operating this product in environments with an explosive atmosphere (zone 0, zone 1, and
zone 2 as well as zone 20, zone 21, and zone 22) as specified in the EU directives ATEX
equipment and ATEX workplace (94/9/EC and 1999/92/EC) is strictly prohibited by the
manufacturer!
 Please handle the product with care. Shocks, impact or falling, even from a low height, may
cause damage.
 Do not operate the product if the housing is damaged!
 Only use original spare parts from the manufacturer for operation of the device.
 In all other cases please contact: [e-mail]
