User's Manual

DSD Gen5

User Manual

Edition 9.1 _ 1911

DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB

DataCollect reserves the right to change any information contained within this technical note at its own discretion

„Setup“

LED

„Get Data“

LED

„Memory Card“

LED

Several setup files from different devices can be saved simultaneously on one SD card and

transferred to the respective device one after the other.

When you press Setup, DataCollector starts the

transfer of the setup file to the DSD. This process

takes about 3 seconds. During the entire setup

process the LEDs of the DSD remain switched off.

Afterwards, an Online mode starts for the purpose of a function check. The DSD then reports

detected vehicles to the DataCollector for a period of about 2 minutes. The vehicles are then

displayed based on their direction of travel, as follows:

(A) Vehicles approaching the DSD:

 Get Data LED flashes

(B) Vehicles moving away from the DSD (only

DSDtraffic):

 Setup LED flashes

The online mode can be extended another 2 minutes

by pressing one of the two keys (retrigger).

If there is no setup file or no valid setup file for the connected DSD, this is indicated by fast flashing

of the SD card LED. Finally, the communication is terminated. The DataCollector switches off

(Auto Off) and the DSD returns to operating mode.

LED 1

LED 2

Setup

starts