User's Manual

DSD Gen5

User Manual

Edition 9.1 _ 1911

DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB

DataCollect reserves the right to change any information contained within this technical note at its own discretion

Step

Description

DataCollector Symbol

Display

duration

Download of the system and traffic data

stored in the device, storage of this data on

the SD card of the DataCollector in the form

of files with the extensions *.dsd // *.sdr. Now

the Bluetooth and SD Card LED continue to

flash slowly during the download.

approx.

20sec

In the next step the Setup button prompts you

to press it by flashing.

approx.

5sec

The Setup file stored on the SD card of the

DataCollector is now transferred via the still

existing communication connection between

the DataCollector and the instrument.

approx.

3sec

The completion will be automatically fulfilled

without any keystroke. Then the

DataCollector automatically switches off (Auto

off).

*If devices are already stored in the DataCollector's internal memory, the connection to a stored

device will be established immediately (approx. 6s / device). The order of the devices to be

contacted is defined by the list of recently contacted devices which is stored in the DataCollector.

If several instruments are within the Bluetooth

range of a DataCollector, switching over between

the instruments can take place as soon as the BT communication to a instrument is established

– see DataCollector Manual / Chapter 15.3.

Attention! You can create setup files only via your web access on www.myTrafficData.com. These

files are exclusively device-specific, i.e. you can use DataCollector only to parametrise the

respective device for which you have created a setup file on the website!