User's Manual

DSD Gen5
User Manual
Edition 9.1 _ 1911
DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB
Copyright by DataCollect Traffic Systems GmbH ♦ www.DataCollect.com Technical changes possible at all times
DataCollect reserves the right to change any information contained within this technical note at its own discretion
25
12 Download / Transmit setup file
Via DataCollector
Create the setup file by clicking the Download button.
Storage location for DataCollector: DataCollector SD card
Insert the SD card with the saved setup file in the DataCollector and connect your DSD to the
power supply.
Follow these steps:
Step
Description
DataCollector Symbol
Display
duration
1
Performance of the intro – see chapter 10
-
approx.
2sec
2
After the intro the white LED in the GetData
button prompts you to press it by flashing.
approx.
15sec
3*
Scan for Bluetooth
®
-enabled devices (DSD,
SDR) if the DataCollector's internal memory
does not already show such devices. The
scan process is visualised by the fast flashing
of the Bluetooth
®
LED. As soon as a
Bluetooth
®
contact is established to a device,
the fast flashing of the LED switches to
continuous illumination.
approx.
45sec
4
Communication establishment to the now
connected device is shown by a slow flashing
Bluetooth LED.
approx.
5sec