User's Manual

DSD Gen5

User Manual

Edition 9.1 _ 1911

DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB

DataCollect reserves the right to change any information contained within this technical note at its own discretion

Panel Timer

Here you can set the period in which your DSD should be active. There are up to four time periods

and two different speed limits definable. By ticking the period, you are activating the setting per

period.

The previous screenshot shows the following example scenario:

1. active weekdays between 07: 00-14: 00 clock - speed limit 30 km / h

2. active weekdays between 0:00 - 06:59 and - 14:00 - 23:59 clock - speed limit 50km / h

3. Active all weekend - speed limit 50km / h

You can now also set 2 different safety thresholds. Next to the time period are two arrows that

allow you to regulate the speed thresholds of the first activated time period. The second threshold

value can be set using the slider under the Configuration panel.

Caution: The DSD is deactivated in the periods not defined, hence it neither displays any speeds,

nor does it record the traffic data!

If you have additionally acquired the Safety app, you can set an individual Safety threshold for

each period. Next to the period there are two arrows, by means of which you can regulate the

speed.

If you have acquired the Display PSL app as well as the timer function, you can adjust the allowed

speed limit in the defined periods using the arrows.