User's Manual

DSD Gen5

User Manual

Edition 9.1 _ 1911

DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB

DataCollect reserves the right to change any information contained within this technical note at its own discretion

Power supply via PowerUnit

For the installation instructions of the PowerUnit, please

refer to the enclosed commissioning instructions.

For connection and for the final insertion of the PowerUnit

into the side of the deep mast holder, please first remove

the cross bar of the mast holder. After removing the rear

dust protection cap of the DSD, please connect the angular

socket of the PowerUnit to the built-in plug of the DSD by

simply plugging in (Push / Pull principle). The angular

socket is protected against incorrect plugging in by means

of a one-way safety feature. Please observe the white mark!

Power supply via SolarSystem + SolarPowerUnit

For the installation instructions for the SolarSystem and the

SolarPowerUnit, please refer to the enclosed

commissioning instructions.

Please observe the distance from the mast holder of the

DSD of at least 150cm / max. 300cm. After removing the

rear dust protection cap of the DSD, please connect the

angular socket of the SolarPowerUnit to the built-in plug of

the DSD by simply plugging in (Push / Pull principle). The

angular socket is protected against incorrect plugging in by

means of a one-way safety feature. Please observe the

white mark!