User's Manual

DSD Gen5
User Manual
Edition 9.1 _ 1911
DSD Gen5_Smartphone_User manual_Edition 9.1_1911_GB
Copyright by DataCollect Traffic Systems GmbH ♦ www.DataCollect.com Technical changes possible at all times
DataCollect reserves the right to change any information contained within this technical note at its own discretion
10
7 Assembly
Assembly of the mast holder
The assembly instructions for the mast holder can be found
in the enclosed installation instructions.
Assembly of the DSD
The DSD is hooked into the four holes provided in the
mounted mast holder with the four locking bolts on the rear
side. Before this, remove the cross bar of the mast holder.
When using a PowerPack or a PowerUnit, the energy
supply unit can now be inserted into the mast holder after
hooking in the DSD, and can be secured using the cross
bar and the padlock (not included in the delivery).