Specifications

22
Datacard 150i and 275/280P/295 Card Personalization
Systems: Guide for Use with ID Works Software
ID Works Basic Version 5 Online Reference Library
Reassigning the Serial Communication Port to the Printer
Driver:
Before using a non-ID Works application with the Card
Personalization System, redirect the printer driver to serial
communication port 1. Refer to the instructions above for information
on accessing the printer Properties dialog box.
I Get “Limits Exceeded” Errors Printing Cards in ID
Works Production
This error indicates that a text or graphics field extends too far to the
right. Adjust your card design so that:
• The maximum number of characters in the text field does not
extend too far to the right.
• (275/280P/295 System with UltraGrafix option only) All graphics
(static graphics, variable graphics, and photos) are at least 0.1
inch (2.5 mm) from the right edge of the card.
Alternatively, ask your Datacard Service Representative to change
the configuration of your 275/280P/295 System so that Check Card
Limits Error is OFF. If you disable card limits checking, Datacard
recommends that you use text field masking to ensure that instances
of too much data are caught during input.