Specifications

15
Datacard 150i and 275/280P/295 Card Personalization
Systems: Guide for Use with ID Works Software
ID Works Basic Version 5 Online Reference Library
In the Module area, the only type of encoding available is IAT.
8 Click Save. The MagStripe Configuration : [name] dialog box
closes. Click Exit. The MagStripe Configurations dialog box
closes.
9 Click OK to close the Edit Field Properties [Magnetic Stripe]
dialog box.
Changing a Magnetic Stripe Encoder Configuration
Follow these steps to change an encoder configuration:
1 Open or create an ID Works project that has a Card design with a
magnetic stripe field.
2 Select the magnetic stripe field and open the Edit Field Properties
[Magnetic Stripe] dialog box. See the Designer online help topic
“Add a magnetic stripe field to a card” for step-by-step
instructions.
3 On the Encoding tab of the Edit Field Properties [Magnetic
Stripe] dialog box, select Datacard 150i Magstripe Plug-in or
Datacard 275/280P/295 Magstripe Plug-in in the Device list.
4 Click the Edit Configurations button. The MagStripe
Configurations dialog box opens.
5 Select the configuration you want to change and click Edit. The
MagStripe Configuration : [name] dialog box opens.
6 Make the necessary changes.
7 Click Save to save your changes with the current configuration
name. The MagStripe Configuration : [name] dialog box closes.
– or –