Specifications

Using the ID Works Production Application 15
ID Works Basic Version 5 Operator’s Guide
Using Photo Fields
What happens when you enter a photo field depends on how your
project was set up, whether your system has a camera, and, if so,
what kind of camera it is. The most common behavior is for a photo
capture to begin as soon as you enter the photo field. If no dialog box
opens, you must start the capture operation. From the menu bar,
select Capture and then Capture.
D If you need
to select a
source, check
with your System
Administrator.
They may have
forgotten to
assign a source.
The dialog box for the default photo source opens. If an “Unable to
capture photo . . .” message appears, you must select a source for
the photo. From the menu bar, select Capture and then Select
Capture Source or click the right mouse button and select Select
Capture Source from the menu. See the online help topic “Select a
photo source” for step-by-step instructions.
The following paragraphs show the dialog boxes that open for the
photo sources that are available on all ID Works computers.
Photo field