Specifications

Datacard Smart Driver and ImageCard Printer and Magnetic Stripe Plug-ins 7
ID Works Basic Version 5 Online Reference Library
8 Click Exit to close the Datacard Smart Driver Magnetic Stripe
Configurations dialog box. Click OK to close the Edit Field
Properties [Magnetic Stripe] dialog box.
Deleting an Encoder Configuration
Follow these steps to delete an encoder configuration:
1 Open an ID Works project that has a Card design with a magnetic
stripe field.
2 Select the magnetic stripe field and open the Edit Field Properties
[Magnetic Stripe] dialog box. See the online help topic “Add a
magnetic stripe field to a card” for step-by-step instructions.
3 On the Encoding tab of the Edit Field Properties [Magnetic
Stripe] dialog box, select Datacard Smart Driver Magnetic
Stripe Plug-in or Datacard Select/IV Magnetic Stripe Plug-in
in the Device list.
4 Click the Edit Configurations button. The Datacard Smart Driver
Magnetic Stripe Configurations dialog box opens (if using the
DataCard Select/IV Magnetic Stripe Plug-in, dialog box titles will
be different).
5 Select the Configuration you want to delete and click Remove. A
confirmation dialog box opens.
6 Click Yes to remove the configuration. Click Exit to close the
Datacard Smart Driver Magnetic Stripe Configurations dialog box
and then click OK to close the Edit Field Properties [Magnetic
Stripe] dialog box.