Specifications

6 Datacard Smart Driver and ImageCard Printer and Magnetic Stripe Plug-ins
ID Works Basic Version 5 Online Reference Library
Changing an Encoder Configuration
Follow these steps to change an encoder configuration:
1 Open or create an ID Works project that has a Card design with a
magnetic stripe field.
2 Select the magnetic stripe field and open the Edit Field Properties
[Magnetic Stripe] dialog box. See the online help topic “Add a
magnetic stripe field to a card” for step-by-step instructions.
3 On the Encoding tab of the Edit Field Properties [Magnetic
Stripe] dialog box, select Datacard Smart Driver Magnetic
Stripe Plug-in or Datacard Select/IV Magnetic Stripe Plug-in
in the Device list.
4 Click the Edit Configurations button. The Datacard Smart Driver
Magnetic Stripe Configurations dialog box opens (if using the
DataCard Select/IV Magnetic Stripe Plug-in, dialog box titles will
be different).
5 Select the Configuration you want to change and click Edit. The
Datacard Smart Driver Magnetic Stripe Configuration : [name]
dialog box opens.
6 Make the necessary changes.
7 Click Save to save your changes with the current configuration
name. The Datacard Smart Driver Magnetic Stripe Configuration :
[name] dialog box closes.
– or –
Click Save As to save your changes under a new configuration
name without changing the original configuration. The Save
Configuration as dialog box opens. Type a configuration name
and click OK.