Specifications

Plan and Create the Report Design 77
ID Works Basic Version 5 Administrator’s Guide
The Interpretation Text Options area of the Advanced tab lets you
choose to have the contents of the barcode displayed in regular text.
When Interpretation Text On is selected, you can also specify the font
characteristics of the text and the location of the text relative to the
barcode.
You must provide sample barcode data to display on the report block
and print on the sample report. You do this on the General tab of the
Edit Field Properties [Barcode] dialog box. If you enter too much
sample data, the field is filled with diagonal lines. If the barcode type
does not support the data you entered, the field is filled with a
crosshatch pattern.
MSI Plessey Checksum: none, Mod 10, Mod 11
Density: High, Medium, Low
PDF417 (text only;
binary data not
supported)
Error Correction: none, Level 1 through
Level 8 (maximum)
Density: High, Medium, Low
Postnet Zip + 4 (no options available)
UCC128 Checksum: none, Mod 10
Density: High, Medium, Low
UPCA Supplemental Digits: 0, 2, 5
Density: High, Medium, Low
UPCE – 0 System
6 Digit
Supplemental Digits: 0, 2, 5
Density: High, Medium, Low
UPCE – 1 System
6 Digit
Supplemental Digits: 0, 2, 5
Density: High, Medium, Low
UPCE 11 digit Supplemental Digits: 0, 2, 5
Density: High, Medium, Low
Barcode Type Options Available