Specifications

32 Plan and Create the Card Design
ID Works Basic Version 5 Administrator’s Guide
Non-Printable Area
You create a non-printable area to ensure that an area of a card is not
printed over, topcoated, or used for another purpose. When you
insert a non-printable area, ID Works Designer sizes and positions it
in the correct location for the signature panel of the most common
card stock. Because there are many variations in the size and
placement of signature panels on cards, you can define the size and
position of the non-printable area. You can also use the non-printable
area field for other purposes. See the online help topic “Add a non-
printable area to a card” for step-by-step instructions.
Line
You can add horizontal and vertical lines to your card design. You
can choose from 10 line weights with square or rounded ends. You
can size and rotate the line in 90-degree increments. You can also
select any color available on your computer for your lines.
See the online help topic, “Add a line to a card” for step-by-step
instructions.
Non-printable
area field
Line field