User guide

Custom Desktop Issuance 6.0 - User Guide
Name: CDI_0.docx September 2012
Page 76 / 78
 Then register your Computer in SCS/APM by clicking on the ‘Register’ button.
 Machine ID in ‘Hardware Setup’ of CDI must be the same than Computer
Name defined in the ‘Configure Programming Station’ tool.
↔
‘Configure Programming Station’ tool CDI ‘Hardware Setup’
 Select the reader in Internal Contact Smart Card or in Internal Contactless
Smart Card (depending of your device and what you want to do).
 Click on the save button (you can check within Perso Devices folder from
General Object Loader if equipment name has been correctly saved).
 Configure Machine Setup for SCS/APM (page 18)
6.1- SPECIAL FOR DC315GX
In order to use CDI with SCS/APM, the printer needs to be registered to SCS Server:
 Note down the IP address of the computer (or boxer) driving the printer
 On SCS Server, run General Object Loader from Programs -> Datacard ->
Syntera Customization Suite
 Add a new object with the IP in Generator field: