User guide

Custom Desktop Issuance 6.0 - User Guide
Name: CDI_0.docx September 2012
Page 73 / 78
5.4.1- Hardware Setup
Select any item in the Hardware Setup window for information.
 To create a new Hardware setup, click the Add button.
 Optionally modify the description of the Hardware setup.
 Configure the Machine Communication Setup (USB or RS232).
 Configure Device (Protocol Smartdriver, Machine ID, Polling Interval, Time out, Wait
time print)
 Enter a Machine ID. This is typically the user’s choice. (Example: DC280 No1) The
Machine ID is a field that can be used in the Audit Trail report.
NB: For SCS/APM use, please go to chapter 6 “Plug-in for using CDI with SCS/APM” (page
75)
 If using a 150i machine, enter the machine’s password for magstripe encoding.
 Check Embosser if the printer is so equipped.
 Check Color if the printer is so equipped (color printing for SPxx Plus Series).
 Check Ultragrafix if the printer is so equipped (monochrome printing for DC280).
 Check the following one if the printer is equipped with a Smart Card module: Internal,
External or Mag Stripe (contact-less Smart Card module) is used (NOT USED WITH
SCS/APM).