User guide

Custom Desktop Issuance 6.0 - User Guide
Name: CDI_0.docx September 2012
Page 6 / 78
2 Installation
2.1- PC REQUIREMENTS
The minimum PC requirements for using CDI software is as follows:
 Pentium 1.5 GHz
 512 MB of RAM
 Windows XP™, 7™, Server 2003, Server 2008
 DVD-ROM drive
 Screen size 800x600
 2 USB Ports (or 3 with CP/SP Plus Series connected via USB)
2.2- INSTALLATION
Do not connect CDI dongle before installation of drivers has been completed.
To install the CDI software, do the following:
1. With Windows running, close any open application.
2. Insert the CDI software CD in the CD-ROM drive.
3. Select Start from the main Windows menu, then select Run.
4. Type in D:setup.exe, then select OK. (Where D represents the CD-ROM drive.)
5. Follow the online prompts until the software is successfully installed.
The install procedure gives the following two options:
 Typical Installation: The Online Tutorial will be copied on your hard drive along with
the operating software. (Requires a minimum of 35 Mbytes disk space on your PC.)
 Compact Installation: The Online Tutorial will not be copied on your hard drive.
(Requires a minimum of 10 Mbytes disk space on your PC.)
 Custom Installation. Use this option if you want to customize the installation of the
CDI software and its Tutorial.
6. Insert CDI dongle in a free USB port.
7. When prompted to Enter Your User Name, type in ADMIN. Password for this user is
by default ADMIN.
Once the installation process has been completed, CDI must be configured to a
Datacard printer. See Hardware Setup Configuration.