User guide

Custom Desktop Issuance 6.0 - User Guide
Name: CDI_0.docx September 2012
Page 14 / 78
Chip Field
Selecting the Smart Card button allows the inserting of a smart card chip and linking it
to a data field in Data Setup. In Field Name, select the name of the field of the records linked
to the Smart Card module.
Stripe Field
Selecting the Magnetic Stripe button allows inserting magnetic stripe information and
linking it to a data field in Data Setup. In Field Name, select the name of the record fields
corresponding to the magnetic stripe.
The display position of AFNOR and ISO are for visual information only.
Emboss Field
Selecting the Embossing button makes it possible to insert an embossed line and
linking it to a data field in Data Setup. In Field Name, select the name of the record fields to
be linked to the embossed line. The coordinates can be moved manually or by clicking on the
embossed line and moving it with the mouse. A Font must also be selected. The font size is
expressed in cpi (characters per inch): the higher value corresponds to the smaller font.
Same thing for OCR (Optical character recognition) fonts.
Customer Desktop Issuance software allows indent printing. Depending on the
machine you are using (SE48, 150i, FP65i, DC280 or DC315GX-FR), you will be able to print
front indent and/or back indent:
o OCR7 on the front side of the card
o OCR10 on the back side of the card
o OCR14 and OCR15 inverted on the back of the card (if you have specific
Mastercard or Visa font kit installed on your embosser)
Ultragrafix Field
Selecting the Graphics Line button allows inserting a graphics line and linking it to a
data field in Data Setup. In Field Name, select the name of the record fields linked to the
graphics line. The coordinates can be moved manually or by clicking on the graphics line and
moving it with the mouse. The graphics Line can be justified and the font selected.
BarCode Field
Selecting the Barcode button allows inserting a barcode and linking it to a data field in
Data Setup. In Field Name, select the name of the record field linked to the barcode. The
coordinates can be moved manually or by clicking on the Barcode and moving it with the
mouse.