Specifications

18
Datacard 150i and 275/280P/295 Card Personalization
Systems: Guide for Use with ID Works Software
ID Works Standard and Enterprise Version 5 Online Reference Library
Click Help to see descriptions of the information provided by the Job
Monitor and procedures for using it.
Troubleshooting
The interplay among the Windows® operating system, the ID Works
software (including the Datacard plug-ins), the 150i or 275/280P/295
driver, and the physical 150i or 275/280P/295 System is complex. An
incorrect setting in any component can result in unexpected results.
This section lists some common symptoms and the steps you should
take to remedy them.
Embossing/Indent/Magnetic Stripe Fonts Do Not
Appear in the List of Fonts Available for Text Fields
First make sure you have specified that printer fonts are used in the
project. See “Project Properties” on page 3. Note that performing the
last step of the procedure (clicking OK) is required. Closing the Edit
Project Properties dialog box in any other way is not adequate, even
if the Printer Fonts tab appears to have the correct settings when you
enter it.
If the fonts still are not available, check that the fonts have been
selected in the driver. See the Installation and Technical Reference
Manual for your printer driver for information on selecting fonts in the
printer driver.