Specifications

16
Datacard 150i and 275/280P/295 Card Personalization
Systems: Guide for Use with ID Works Software
ID Works Standard and Enterprise Version 5 Online Reference Library
Click Save As to save your changes under a new configuration
name without changing the original configuration. The Save
Configuration as dialog box opens. Type a configuration name
and click OK.
8 Click Exit to close the MagStripe Configurations dialog box.
9 Click OK to close the Edit Field Properties [Magnetic Stripe]
dialog box.
Deleting a Magnetic Stripe Encoder Configuration
Follow these steps to delete an encoder configuration:
1 Open an ID Works project that has a Card design with a magnetic
stripe field.
2 Select the magnetic stripe field and open the Edit Field Properties
[Magnetic Stripe] dialog box. See the Designer online help topic
“Add a magnetic stripe field to a card” for step-by-step
instructions.
3 On the Encoding tab of the Edit Field Properties [Magnetic
Stripe] dialog box, select Datacard 150i Magstripe Plug-in or
Datacard 275/280P/295 Magstripe Plug-in in the Device list.
4 Click the Edit Configurations button. The MagStripe
Configurations dialog box opens.
5 Select the configuration you want to delete and click Remove. A
confirmation dialog box opens.
6 Click Yes to remove the configuration. Click Exit to close the
MagStripe Configurations dialog box and then click OK to close
the Edit Field Properties [Magnetic Stripe] dialog box.