Specifications
6
Datacard 150i and 275/280P/295 Card Personalization
Systems: Guide for Use with ID Works Software
ID Works Standard and Enterprise Version 5 Online Reference Library
Edge To Edge Printing
Because the 150i System does not support graphics, Edge To Edge
Printing, if selected, will be ignored.
Do not attempt to use edge-to-edge printing on a 275/280P/295
System, either by supplying a background graphic that covers the
entire card or by placing fields closer than 0.1 inch (2.5 mm) from any
edge of the card.
Rotate Print Orientation 180 Degrees
Because the emboss and indent fonts can operate in only one
orientation, this selection is not supported. If your 275/280P/295
System includes the UltraGrafix option, you can rotate graphics fields
and text fields that use TrueType or OpenType fonts on a field-by-
field basis.
Portrait Orientation
Because the emboss and indent fonts can operate only in landscape
orientation, this selection is not supported. If your 275/280P/295
System includes the UltraGrafix option, you can rotate graphics fields
and text fields that use TrueType or OpenType fonts on a field-by-
field basis to achieve a portrait effect.
Back Side of Card
See the Designer online help topic, “Create a two-sided card”. The
only types of fields that are allowed on the back side of a card are:
• Magnetic Stripe — used with the Datacard 150i or 275/280P/295
Magstripe Plug-in to encode magnetic stripes. The Card
Personalization System does not need to have magnetic stripe
fonts installed. If your card design includes a magnetic stripe
field, it cannot use magnetic stripe fonts.
• Text that specifies an indent font installed in the System.
For convenience in positioning a text field using an indent font,
you can place a Non-Printable Area on the back side of a card
and then position the text field on top of the non-printable area.
• Text — up to three fields that specify a magnetic stripe font
installed in the System. If your card design includes text fields
that specify a magnetic stripe font, it cannot use an ID Works