Specifications

16 Using the ID Works Production Application
ID Works Standard and Enterprise Version 5 Operator’s Guide
D If you need
to select a
source, check
with your System
Administrator.
They may have
forgotten to
assign a source.
The dialog box for the default photo source opens. If an “Unable to
capture photo . . .” message appears, you must select a source for
the photo. From the menu bar, select Capture and then Select
Capture Source or click the right mouse button and select Select
Capture Source from the menu. See the online help topic “Select a
photo source” for step-by-step instructions.
The following paragraphs show the dialog boxes that open for the
photo sources that are available on all ID Works computers.
Photo from File
If the photo source selected is Photo from File, the Open dialog box
opens. You use standard Windows navigation techniques to find the
drive, folder, and file that contains the photograph that should be
used. Your supervisor or ID Works System Administrator will supply
you with the file location and file naming scheme to use. The Open
dialog box “remembers” the last directory you used. If most of your
photo files are in the same directory, you do not have to do much
navigating. When you select a file, a “thumbnail” of the file displays so
you can verify that you have the correct file.