Specifications

138 Working with Printer Options
ID Works Standard and Enterprise Version 5 Administrator’s Guide
The ID Works software has no way of knowing whether the printer
has a K-panel. If there is no K-panel in the printer ribbon, fields that
have Grayscale and Use K-panel if available selected will print
using the yellow, magenta, and cyan panels at the same time as non-
black fields print. That is, each card side will use only one set of
printer ribbon panels.
Specifying the Print Queue Path
When a Production operator issues a Print or Print All command, the
ID Works software creates a complete image of each card side to be
printed and places the image in a print queue on the ID Works
computer. If the printer has enough memory to store the image, it is
sent to the printer. Because card printing is not as fast as generating
the card images, a backlog of images to be printed can develop. And
because that backlog can require a large amount of disk space
(especially if the card design is complex), you may want to specify a
location for the print queue that you are sure will have sufficient room.
See the Administrator online help topic “Set the system paths” for
step-by-step instructions.