Specifications

10 Using the ID Works Production Application
ID Works Standard and Enterprise Version 5 Operator’s Guide
Using an ID Works Project
How your project opens depends on what privileges you have. If you
are allowed to enter new records, the pointer will be in the field that
the designer of the project designated as the starting field. (This is
usually the field in the upper left corner of the window.) If your project
is connected to a database, the New button on the toolbar will be
“pushed in” and there will be a check mark next to the New command
on the Record menu.
You can start entering information immediately. Most fields will have
a prompt that indicates the kind of information you are to enter in the
field. As mentioned, you can move between fields by tabbing or by
clicking with the mouse.
The following sections discuss how to enter information into each
type of field you may find in your project.
If you need to start over with the record and your project is connected
to a database, from the menu bar select Record and then Refresh.
All fields will return to the way they were when you selected the
record from the database.
If you need to start over with the record and your project is not
connected to a database, from the menu bar select Field and then
Clear All. All fields will return to the way they were when you opened
the project.