Specifications

18 Plan and Create the Card Design
ID Works Standard and Enterprise Version 5 Administrator’s Guide
Title bar—The title bar shows the name of the card you are editing
(Family Pass Card in the example above). If you are viewing the back
side of the card, that is noted in the title bar. The title bar changes
color when that card side is active.
Rulers—The rulers help you locate and size card fields. You turn the
rulers on and off by using the View menu. You specify the unit of
measure to display in the computer’s Control Panel, Regional
Settings property sheet, Number tab, Measurement system setting.
Close your project before changing the unit of measure to display.
Design area—This area represents the card and shows how the card
will look when printed. You place all card fields in this area.
Scroll bars appear if the size of the Card window is smaller than the
size of the card. Use the Maximize button (on the title bar) to make
the Card window as large as possible.
You can create a two-sided card design by simply viewing the back of
the card and placing fields on it. See the online help topic “Create a
two-sided card” for step-by-step instructions.
Orientation
When you start an ID Works project, you have the opportunity to
decide whether you want your card to be in portrait or landscape
orientation. You can change the card orientation during the design
process, but if you do, you will probably have to move some fields to
keep them visible on the card.
Title bar
Rulers
Design area