User`s guide

50 Troubleshooting
111: Card not picked
Theprinterdidnotpickacard.Tocompletethecurrent
card:
Forprinterswithaninputhopper,opentheinput
hopper,addorrepositioncards,andclosethehopper.
Forprinterswithsingle‐cardfeed,pushthecardinuntil
theprinterpicksit.
PresstheUSERbuttonontheprinterorclickOKinthemessagebox.
ClickCancel(thecard)inthe messageboxifyouneedtocancelthecard.
112: Card hopper empty
Theprinterdidnotdetectcardsintheinputhopper.
Addcardstotheinputhopper.
PresstheUSERbuttonontheprinterorclickOKinthe
messagebox.
ClickCancel(thecard)inthe messageboxifyouneedtocancelthecard.
113: Close cover to continue
Theprintercovermustbeclosedtoprint.
Pushdownonthecove
rtolatchit.
PresstheU
SERbuttonontheprinterorclickOKinthe
messagebox.
ClickCa
ncel(thecard)inthemessageboxifyouneed
tocancelthecard.
H
INTS&TIPS
Makesurethattheribboncartridgeisinstalledwiththecartridgehandleeven
withtheedgesoftheprinter.