User`s guide

SD/CD Series Card Printers User’s Guide 27
3.
Insertthecleaningcard.
A. Openthecleaningcardpackageandremovethecleaningcard.
B. Placethecleaningcardintheinputhopperorinthemanualfeed.
C. PresstheUSERbuttontoresumeorclickRetry(or
Resumethecard)intheMessageboxtostartthe
cleaningcycle.
Theprintermov esthecardthroughtheprinterseveral
timesandejectsitintheoutputstacker.
4. Removetheusedcleaningcard.Waitafewminutesforthe
rollerstodry.
5. Preparetheprinterforuse.
A. Replacethecardsintheinputhopper.
B. Replacethecleaningsleeveontheribboncartridgewithanewsleeve,
andremovetheprotectivecover.Referto“LoadingtheCleaningSleeve ”
onpage 18forthestepstofollow.
C. Replacetheribboncartridgeandclosetheprinter.PresstheUSERbutton
toreturntheprintertoReady.Theprinterisreadytoprintcardsagain.
D. Discardtheusedcleaningcardandcleaningsleeve.
H
INTS&TIPS
• Usethecleaningcardandcleaningsleeveonetimeonly.
• Changethecleaningsleeveeachtimeyoucleantheprinterorchangethe
printribbon.
Ifthecardlightisblinkingandtherearecardsintheinputhopper,itindicates
theconfiguredcleaningcounthasbeenreachedanditistimetocleanthe
printer.