User`s guide

18 Using the System
Loading the Cleaning Sleeve
Loadanewcleaningsleevewitheach
newrollofprintribbon.
Theprintershipswiththecleaning
rollerspindleinstalledontheprint
ribboncartridge.
1. Removethecleaningrollerspindle
fromtheribboncartridgeandslide
thecontinuouscleaningsleeve
ontothespindle(a).
2. Snapthespindl ewithsleeveinstalledontotheribboncartridge(b).
3. Removetheprotectivewrapperfromthecleaningsleeve(c).
Installing the Ribbon Cartridge
Installtheassembledprintribbon
cartridgeintotheprinter.
1. Opentheprinter’stopcover.
2. Holdtheprintribboncartridgebythe
handleandlowerintotheprinterwith
thehandletowardthefrontofthe
printer.
3. Mak esurethattheribboncartridgeis
correctlypositionedintheguides.
4. Closetheprinter’stopcover.