User`s guide

16 Using the System
Load and Replace Supplies
Topreparetheprintertoprintcards,loadblankcardstockintotheinputhopper
(optional),andloadprintribbonandacleaningsleeveintotheprintcartridge.
Loading Cards
Dooneofthefollowing:
• Ifyouareusingamanualfeedprinter,skipthisstepandkeepasupplyof
blankcardsclosetotheprinter.
• Forprinterswithaninput
hopper,continuewiththese
steps:
1. Opentheinputhopper.
2. Fancardsbeforeplacing
themintotheinput
hopper(optional).
3. Insertmagneticstripe
cardswiththestripe
downandtowardthe
rightsideoftheinput
hopper.
4. Closetheinputhopper.