User`s guide

20 Using the System
Load the Print Ribbon
Loadtheprintribbonwhenyouinstallthe
printerandwhentheribbonrunsout.
1. Opentheprintercover.
2. Removetheprintribboncartridge.
3. Loadafullrollofprintribbon(theblue
spool)ontothespindleclosesttothe
cartridgehandle.
4. Placethesilvertake‐upspoolonthe
spindlewiththeblackgear.
5. Windthetake‐upspoolcounterclockwise
onefullturn.
Load the Cleaning Sleeve
Loadanewcleaningsleevewhenyouloada
newrollofprintribbon,whenyounotice
debrisontheprintedcards,orwhenthe
cleaningsleeveisnolongersticky.
Theprintershipswiththecleaningroller
spindleinstalledontheprintribbon
cartridge.
1. Removethecleaningrollerspindlefrom
theribboncartridgeandslidethe
spindleintothecontinuouscleaning
sleeve(a).
2. Placethespindlewiththecleaningsleev eontotheribboncartridge(b).
3. Removetheprotectivewrapperfromthecleaningsleeve(c).