User`s guide

14 Using the System
LCD Panel Menus
TheLCDpanelshowsthe printer’s
menusanddisplaysprinter
messagesorconditions.Referto
“Respondto Messages”onpage
61formoreinformation.
Themenusystemhasfourmajor
branches:
• UsetheMaintenance menuto
runacleaningcardorprinta
testcard.
• UsetheStatus menutosee
settingsanddataaboutthe
printer.
• UsetheConfigurationmenuto
changesettings.
• UsetheActivatemenuto
enableordisabletheprinte r 
fortransport.
HINTS&TIPS
• YoucanaccessthemenusystemwhenReadydisplaysonline1oftheLCD
panel.
• TheprinterreturnstotheReadystatusafter2minutesofnoactivity.Changes
notappliedarelost.
• Toleaveaselectionwithoutchangingthevalue,presstheupordownarrow
keyuntilExitdisplays,andthenpresstheE NTE R key .
UsetheActivatemenuonlyduringinstallationorremovalofsystemsthat
requireactivation.