User`s guide

SD/CD Series Card Printers User’s Guide 33
Optional Multi-Hopper
Cleaningaprinterequippedwiththeoptionalmulti‐cardhopperinvolvestwo
steps:cleaningtheprinterandcleaningthehopperrollers.
Prepare the Printer for Cleaning
1. Powerontheprinter.
2. Unlocktheprinterandopentheprinter
suppliesaccessdoor.
3. Opentheprintercoverandremovethe
printribboncartridge.
4. Removethecleaningsleevefromthe
ribboncartridge.(Theribbonmustremain
installedontheribboncartridge.)
5. Replacetheribboncartridgeintheprinter
andclosethecover.
6. Openthemulti‐hopperdoorandremove
anyunprintedcards.
7. Openthecleaningcardpackage,
removethecards,andinsertthe
cleaningcardsintothehoppers.(Plan
torunthecleaningcardsimmediately.
Thecleaningcardsdryoutiftheyare
outofthepackageformorethana
fewminutes.)
8. Closethemulti‐hopperdoorandlock
theprinter.