User`s guide

20 Using the System
4. Loadafullrollofprintribbonontothe
spindleclosesttothecartridgehandle.
5. Placetheemptyspoolonthespindlewith
theblackgear.
6. Windtheemptyspoolcounterclockwise
onefullturn.
Load the Cleaning Sleeve
Loadanewcleaningsleevewitheachnewroll
ofprintribbon.
Theprintershipswiththecleaningroller
spindleinstalledontheprintribboncartridge.
1. Removethecleaningrollerspindlefrom
theribboncartridgeandslidethespindle
intothecontinuouscleaningsleeve(a).
2. Placethespindlewiththecleaningsleeve
ontotheribboncartridge(b).
3. Removetheprotectivewrapperfromthe
cleaningsleeve(c).