User`s guide

SD/CD Series Card Printers User’s Guide 19
Optional Multi-Card Hopper
1. Unlocktheprinterandopenthemulti‐cardhopper.
2. Loadthecardsintothehoppers.
TheinputhoppersarelabeledH1
throughH6.Youcanloadupto
100cardsintoeachhopper.(Fan
thecardsbeforeplacingthemin
thehoppers—optional.)
• Insertmagneticstripecards
withthestripedownand
towardtherightsideofthe
inputhopper.
• Insertsmartcardswiththe
smartcardchipontoptowardthebackofthehopper.
3. Closethemulti‐cardhopperandlocktheprinterwhenyoufinishloading
cards.
Load the Print Ribbon
Loadtheprintribbonwhenyouinstalltheprinterandwhentheribbonrunsout.
1. Unlocktheprinterandopentheprintersuppliesaccessdoorontheoptional
multi‐cardhopper.
2. Opentheprintercover.


3. Removetheprintribboncartridge.