User`s guide

SD/CD Series Card Printers User’s Guide 17
7.
PressENTER toreturntotheNetworkStatusmenu.
Gateway Addressdisplaysonline2.
8. PressENTER todisplaythegatewayaddress.Recordit,
ifnecessary.
9. PressENTER toreturntotheNetworkmenu.
10. PressthedownarrowkeytoscrolltoExitonline2.
11. PressENTE R.Then,presstheUSERbuttontoreturntheprintertoReady.The
USERbuttonglowsgreen.
Print a Test Card
Theprinterincludesatestcardthatrunswithoutusingadriverorothersourceof
carddata.Useittoverifythattheprinterisworking.
1. BeginwiththeprinterReady.TheUSERbuttonshows
steadygreen.
2. PresstheUSERbuttontodisplaySuspendedonLine1
oftheLCDpanel.
3. PressENTER toenterthemenusystem.
4. PressENTER toentertheMaintenancemenu.
5. PressthedownarrowuntilTest Carddisplayson
Line 2.
6. WithTest CarddisplayedonLine2,pressENTER to
displayStartonLine2.
7. PressEntertoprintthetestcard.
Afterthecardprints,theprinterreturnsto
Ready.