User`s guide

14 Using the System
User Button and Light
Theprinter’sUSERbuttondisplayswithaborderoflightthatindicatesthesystem
status.UsetheU
SERbuttonto:
• Suspendprinteractivity–presstheUSERbuttonwhentheLCDpaneldisplays
Ready.
• Clearamessage–presstheUSERbuttononce.
• Clearallmessages–presstheUSERbuttonfor2secondsormore.
• Clearallcardscurrentlyprinting–pressandholdtheUSERbuttonfortwoor
moreseconds.(Makesurethatthisactionisallowedinyourcardsystem.)
• Seewhethertheprinterisready,busyprinting,ornotavailable.Indicators
includethefollowing:
Down Arrow, Up Arrow, and Enter Key
Usethearrowkeystomovethroughtheprintermenusystem,andtheENTER key
tomakeaselection.
TheLCDpanelnormallydisplaysthefirmwareversioninstalledintheprinter.
PressthedownarrowkeywhiletheLCDpaneldisplays
Readytodisplayadditional
informationabouttheprinter,includingtheprintermodel,serialnumber,and
networkIPaddressorUSBIPaddress.
Off The printer is off or suspended.

Green The printer is ready.

Blinking green The printer is busy.

Amber The printer is not ready.
The P
OWER button was pressed
to turn the printer off.

Blinking Amber The printer has an error.

Color Cycle:
Amber, Green,
Light Green, Off
The system is not ready or a
door on the system is open.
The colors cycle quickly.
Close and Lock Doors displays
on the LCD panel if no other
message is present.
