Specifications

50 Printer Manager
• YMCPowerNosRGB‐ModifytheintensitywhenprintingwithoutthesRGB
colormode.
Increasethevaluetomakethenon‐sRGBcolordarker
Decreasethevalueifusingnon‐sRGBcolormodetopreventoverlydark
printingorribbonwrinklesortears.
• YMCWhiteShade‐Modifytheamountofpowerappliedtotheprintheadto
reduceribbonfrictionwithouttransferringmaterial.Decreasethevalueif
unprintedorwhiteareasofthecardhavecolorappliedtothemandshould
not.
Pick
PicksettingsareavailableforWebServiceaccess‐levelusersonly.Contactyour
serviceproviderforinformationaboutchangingtheprinter’spicksettings.
Transport
Changesettingsasneeded,andthenclickSetCurrenttoapplychanges.
• EjectHopperSpeed‐Optimizeejectspeedbasedonhoppertype.
Selectehs_Standardiftheprinterhasastandardhopper.
Selectehs_Extendediftheprinterhasanextendedhopper.
• TransMedSpeed‐Setthespeedatwhichtorunthetransportmotorwhen
clearingerrors.
Flipper
Flippersettingsareusedtosetvaluesfortheduplexmoduleinduplex‐option
printers.FlippersettingsareavailableforWebServiceaccess‐levelusersonly.
Contactyourserviceproviderforinformationaboutchangingtheprinter’sflipper
settings.
Description Default Value Current Value (unit)
Allowed
Range
1) EjectHopperSpeed ehs_Standard ehs_Standard
2) TransMedSpeed 800 800 [300-1800]