Specifications

SD/CD Installation and Administrator’s Guide 9
Load the Cleaning Sleeve
Loadanewcleaningsleevewitheachnewroll
ofprintribbon.
Theprintershipswiththecleaningroller
spindleinstalledontheprintribboncartridge.
1. Removethecleaningrollerspindlefrom
theribboncartridgeandslidethespindle
intothecontinuouscleaningsleeve(a).
2. Placethespindlewithcleaningsleeveonto
theribboncartridge(b).
3. Removetheprotectivewrapperfromthe
cleaningsleeve(c).
Install the Ribbon Cartridge
Installtheassembledprintribboncartridgeintotheprinter.
1. Opentheprintercover.
2. Holdtheprintribboncartridgebythehandleandloweritintotheprinter
withthehandletowardthefrontoftheprinter.


3. Makesurethattheribboncartridgeiscorrectlypositionedintheguides.
4. Closetheprintercover(andthesuppliesaccessdoorontheoptionalmulti‐
cardhopper).Locktheprinter,ifnecessary.